Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this video, you will see step-by-step instructions on how to replace the engine oil and oil filter on a 2013 Triumph Daytona 675, performing the routine maintenance service. First, warm up the engine for a few minutes; then remove the lower fairing of the bike by unscrewing the fastening screws. Next, unscrew the oil drain bolt to let the oil flow out; in the meantime, use the filter wrench to unscrew the oil filter located near the exhaust headers. Finally, hand-tighten the new filter and add the engine oil!

Updated on 27 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Engine Oil and Oil Filter Replacement for the Triumph Daytona 675
Engine Oil and Oil Filter Replacement for the Triumph Daytona 675
Daytona 675 In this brief guide, we will cover the steps necessary for replacing the engine oil and oil filter as part of the regular maintenance service for the…
How to Perform an Oil Change and Oil Filter Replacement on a Triumph Daytona 675
How to Perform an Oil Change and Oil Filter Replacement on a Triumph Daytona 675
Daytona 675 Today, you will see the instructions for performing routine maintenance, specifically the oil change and oil filter replacement, on a Triumph Daytona…
How to Replace the Thermostat on a Triumph Daytona 675
How to Replace the Thermostat on a Triumph Daytona 675
Daytona 675 This guide will illustrate the procedure for removing and replacing the thermostat on a Triumph Daytona 675 motorcycle. First, place the bike on a st…

How to Remove the Handlebar Ends and Mirrors on the Royal Enfield Interceptor 650

This guide shows how to remove the handlebar ends and replace the mirrors on the Royal Enfield Interceptor 650. The first step is to unscrew the bolt holding the handlebar end in place using an Allen key. Once the bolt is removed, carefully pull out the finishing block. Take the replacement finishing block and, after loosening the fixing hex bolt, insert it into position and tighten it. Install the mirrors at the end of the element and tighten the mirror fixing bolt. Make the necessary adjustments to ensure proper rear visibility.

Watch the video!


by ScegliAuto

More videos