Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Engine Oil and Oil Filter Replacement for the Triumph Daytona 675

Model: Triumph Daytona 675
Part: Engine oil

Video tutorial

In this brief guide, we will cover the steps necessary for replacing the engine oil and oil filter as part of the regular maintenance service for the Triumph Daytona 675. First, drain the engine oil by unscrewing the oil drain bolt located under the engine; allow it to drain into a container for about ten minutes.

Next, use a socket spanner to unscrew and remove the oil filter; replace the cartridge with a new one, tightening it gently, and finally pour in the new engine oil!


Updated on 17 May 2026 by ScegliAuto


Related tutorials

How to Perform an Oil Change and Oil Filter Replacement on a Triumph Daytona 675
How to Perform an Oil Change and Oil Filter Replacement on a Triumph Daytona 675
Daytona 675 Today, you will see the instructions for performing routine maintenance, specifically the oil change and oil filter replacement, on a Triumph Daytona…
Engine Oil and Oil Filter Replacement on a 2013 Triumph Daytona 675
Engine Oil and Oil Filter Replacement on a 2013 Triumph Daytona 675
Daytona 675 In this video, you will see step-by-step instructions on how to replace the engine oil and oil filter on a 2013 Triumph Daytona 675, performing the r…
How to Change the Engine Oil in the Triumph Daytona 675?
How to Change the Engine Oil in the Triumph Daytona 675?
Daytona 675 In this tutorial, you will see how to change the engine oil in the Triumph Daytona 675, a very simple and quick operation to be carried out every 12 …

How to replace the drive belt on the Yamaha Xmax 300

Here are the instructions for removing and replacing the drive belt on the Yamaha Xmax 300 scooter. First, place the scooter on its centre stand and start unscrewing all the screws securing the transmission cover, which are located on the sides; then unscrew the central nut of the fan and subsequently that of the clutch bell, as shown in the video. Once the components are removed, take out and replace the drive belt with a new one; reassemble or replace the entire clutch pack if necessary.

Watch the video!


by ScegliAuto

More videos