Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this video tutorial, you will learn how to remove and replace the front wheel bearing, which also applies to the rear, on the Triumph Bonneville T100, as well as on the Scrambler. First, remove the wheel from your motorcycle by unscrewing and removing the central axle and disconnecting the brake caliper; then tap on the wheel bearing, perhaps using a socket with the same diameter as the bearing, to push it out from the top side. At this point, insert the new bearing, lubricating the seat first and finally inserting the circlip!

Updated on 28 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Headlight Bulbs on a Triumph Bonneville T100
How to Replace the Headlight Bulbs on a Triumph Bonneville T100
Bonneville T100 Below are the instructions that will allow you to dismantle and replace the headlight bulbs on a Triumph Bonneville T100 motorcycle. First, place the…
How to Replace the Spark Plugs on a Triumph Bonneville T100
How to Replace the Spark Plugs on a Triumph Bonneville T100
Bonneville T100 This guide will show you how to remove and replace the spark plugs on a Triumph Bonneville T100. First, place the motorcycle on a stand and disconnec…
How to Remove the Battery from a Triumph Bonneville T100
How to Remove the Battery from a Triumph Bonneville T100
Bonneville T100 Today, we will see how to remove and replace the battery on a Triumph Bonneville T100 motorcycle by following these simple and quick steps. First, pl…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos