Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Spark Plug on the Triumph Daytona 675?

Model: Triumph Daytona 675
Part: Spark plugs

Video tutorial

To replace the spark plug on the Triumph Daytona 675, loosen the screws that secure the seat to its housing so that you can unscrew the screws and disconnect the connectors that secure the fuel tank. Once this is removed, you will have access to the underlying components by disconnecting the connector attached to the coil.

By removing this part, you will gain access to the spark plug below, which should be extracted from its housing using a socket wrench. After removal, you can insert a new one, reassembling all previously removed parts.


Updated on 18 May 2026 by ScegliAuto


Related tutorials

How to Replace the Thermostat on a Triumph Daytona 675
How to Replace the Thermostat on a Triumph Daytona 675
Daytona 675 This guide will illustrate the procedure for removing and replacing the thermostat on a Triumph Daytona 675 motorcycle. First, place the bike on a st…
How to Remove the Rear Wheel of the Triumph Daytona 675
How to Remove the Rear Wheel of the Triumph Daytona 675
Daytona 675 Follow these instructions to remove and replace the rear wheel or tyre of the Triumph Daytona 675 motorcycle. First, lift the rear wheel off the grou…
How to replace the stator of the Triumph Daytona 675
How to replace the stator of the Triumph Daytona 675
Daytona 675 Below we will discover the instructions that will allow us to disassemble and replace the stator of the Triumph Daytona 675 motorcycle. First, we pla…

How to Set the Time on a Kymco DTX360?

To set the time on a Kymco DTX360, follow these steps. First, turn on the scooter and ensure it is in time display mode on the dashboard. Once you find this mode, press and hold the button for setting the time, located on the scooter's handlebars. After a few seconds, the display will start to flash, indicating that you can now adjust the time. Use the adjustment buttons to increase or decrease the hour until you reach the desired time. When you have set the correct time, press the time setting button again to confirm your selection. The display will stop flashing and the time will be set correctly. Be sure to consult the owner's manual for specific instructions for your Kymco DTX360 model, as the procedure may vary slightly.

Watch the video!


by ScegliAuto

More videos