Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Today, in this video tutorial, you will learn how to remove and replace the engine air filter of the Triumph America. First, remove the passenger seat and the driver's seat; then unscrew the screws of the plastic cover found underneath, using a socket spanner to access the filter, as shown in the video. At this point, remove the old air filter and replace it with the correct new one; insert it properly into the filter box and reassemble everything by applying the reverse procedure of disassembly!

Updated on 2 June 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Replace the Engine Oil and Oil Filter on the Triumph America 865
How to Replace the Engine Oil and Oil Filter on the Triumph America 865
America In this guide, learn how to perform the routine maintenance oil change on a Triumph America 865cc in simple and quick steps. First, position your mot…
How to replace the engine oil in the Triumph America?
How to replace the engine oil in the Triumph America?
America In this tutorial we can see how to replace the engine oil in the Triumph America, an extremely simple and quick operation. First of all, make sure th…
How to Replace the Battery on a Triumph America
How to Replace the Battery on a Triumph America
America Start by removing the cover located near the battery of your Triumph America. Then, unscrew and remove the screw that secures the support bracket of …

Servicing a Honda SH300 Scooter

How to service the SH 300 scooter. This operation should be done with the engine cold. Remove the cover and take out the air filter, cleaning the compartment where the new one will be placed. Refit the three screws you removed earlier and reassemble the cover. Remove the oil cap, take a 12 mm spanner and unscrew the oil plug from underneath. Allow the oil to drain into a suitable container, which you will then dispose of at an authorised centre. Remove the filter, clean the cavity where the new one will be fitted, and tighten it with the spanner. Refit the oil cap screw. Always change the washer on the cap. Now, refill with oil. You will need a synthetic oil like Motul 5100 10W40, which costs £12.40 per litre on Amazon. If you are doing a complete change, you will need two cans, as you will require 1.6 litres including the filter. After adding the oil, let it rest for a few minutes, then run the engine for a few minutes and check the level. If necessary, top it up: it should be halfway between min and max.

Watch the video!


by ScegliAuto

More videos