Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter on a Triumph Speed Triple?

Model: Triumph Street Triple S 660
Part: Air filter

Video tutorial

To replace the air filter on the Triumph Speed Triple, unscrew the screws and disconnect the cables connected to the fuel tank located at the front of the bike. Once this is completely freed from the screws, you can lift the tank to access the parts underneath: here you will find the filter inside its box, which must be opened by unscrewing the screws.

This way, the filter can be removed and replaced with a new spare part; after replacement, you can reassemble all the parts removed earlier.


Updated on 1 July 2026 by ScegliAuto


Related tutorials

How to Remove the Fuel Tank from a Triumph Speed Triple S 660?
How to Remove the Fuel Tank from a Triumph Speed Triple S 660?
Street Triple S 660 To remove the fuel tank from the Triumph Speed Triple S 660, loosen the two screws securing it at the front of the tank, just behind the handlebars. …
How to Change the Engine Oil and Oil Filter on a Triumph Street Triple
How to Change the Engine Oil and Oil Filter on a Triumph Street Triple
Street Triple S 660 Today, we will discover how to carry out the routine maintenance service by changing the engine oil and oil filter on a Triumph Street Triple RS. Fir…
Replace the Brake and Clutch Levers on the Triumph Street Triple S 660
Replace the Brake and Clutch Levers on the Triumph Street Triple S 660
Street Triple S 660 In today's tutorial, you will learn how to remove and replace the brake and clutch levers on the 2019 Triumph Street Triple S 660. First, remove the …

Replacing the Front Brake Pads on the Triumph Daytona 675

The following instructions will allow you to remove and replace the front brake pads on the Triumph Daytona 675. First, place the bike on a stand and begin undoing the fixing screws of the front brake caliper; apply pressure to the caliper piston to retract it, thus removing the old brake pads, as shown in the video. At this point, clean the caliper of any residual dirt, then install the new original brake pads; reattach the caliper to the disc, replacing the other brake pads in the same manner!

Watch the video!


by ScegliAuto

More videos