Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Triumph
    3. :
  3. Tiger 800 Xc
    4. : How do you replace the front turn signal bulb on the Triumph Tiger 800 XCX?

Model: Triumph Tiger 800 Xc
Part: Headlight bulb
How do you replace the front turn signal bulb on the Triumph Tiger 800 XCX?

To replace the front turn signal bulb of the Triumph Tiger 800 XCX, you need to access the bottom part of the headlight, between the headlight and the fender. Here you will be able to locate the base part of the bulb, connected to its corresponding connector. From here, you can remove the bulb from its housing and disconnect it from the connector. This way, you can connect the new bulb to the cable, inserting it into its housing in the headlight. By doing this, you can turn on the motorcycle and verify that the bulb is working.


Posted on 15 April 2023 by ScegliAuto



How to replace the front headlight bulb on the Triumph Tiger 800?
Tiger 800 Xc Replacing the headlight bulb on the Triumph Tiger 800, as we can see in this tutorial, is an extremely simple and quick operation. First of all, make
Changing the coolant on the Triumph Tiger 800
Tiger 800 Xc Let's see in this guide how to bleed the cooling system and how to replace the antifreeze on a Triumph Tiger 800. First, let's disconnect our coolant
How to replace the coolant on the Triumph Tiger 800
Tiger 800 Xc In this video tutorial we will see how to replace the coolant of the Triumph Tiger 800, following these simple and quick steps. First we put our bike

How to change the engine oil of a Ducati Panigale V4?

To change the motor oil of a Ducati Panigale V4, start by placing the motorcycle on a central or side stand to ensure stability. Start the engine and let it run for a few minutes to heat up the oil and make it more fluid. Turn off the engine and locate the oil drain plug, usually located on the bottom side of the engine. Use an appropriate wrench to unscrew the drain plug and let the used oil drain completely into a collection pan. Once the oil is completely drained, securely tighten the drain plug. Next, locate the oil fill plug on the top side of the engine. Remove the plug and use a funnel to slowly pour the recommended amount of new oil for your motorcycle model. Make sure not to exceed the maximum level indicated on the oil dipstick. Finally, replace the fill plug and ensure it is tightly secured. Check for any oil leaks and start the engine for a few minutes to evenly distribute the new oil in the engine. Once completed, turn off the engine and check the oil level again to ensure it is correct.

Watch the video!


by ScegliAuto

More videos