Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Replacing the front headlight on the Triumph Modern Classic, as shown in this tutorial, is an extremely simple and quick operation. First, position yourself in front of the headlight, then locate the two bolts on the lower edge and, using a 5mm hex key, unscrew both. Next, separate the headlight from the mount, disconnect the power connector, and remove the large rubber cap. At this point, if necessary, transfer the bulb to the replacement and mount it by simply following the reverse procedure.

Updated on 16 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front headlight on the Triumph Modern Classic?
How to replace the front headlight on the Triumph Modern Classic?
Modern Classics .. In this tutorial, we can see how to replace the front headlight on the Triumph Modern Classic, an extremely simple and quick operation... …
How to Replace the Fuel Tank of the Triumph Modern Classic
Modern Classics In this brief and simple guide, learn the steps to remove and replace the fuel tank of the Triumph Modern Classic, following the instructions below. …
Battery Replacement on Triumph Modern Classics
Battery Replacement on Triumph Modern Classics
Modern Classics To replace the battery on Triumph Modern Classics, first remove the main seat to access the battery underneath. First, disconnect and remove the uppe…

How to Reset the Engine Oil Light on a Yamaha XMax 250

This short video demonstrates the procedure to reset the engine oil light on a Yamaha XMax 250 scooter. The operation is very simple and quick; first, insert the motorcycle key into the designated slot and turn it to the first position to power on the instrument panel without starting the vehicle. At this point, you will see the light on the display; simply press the "oil change" button located at the centre of the motorcycle's speedometer and hold it until the light stops flashing. The operation will then be complete; to verify success, turn off and then turn on the instrument panel.

Watch the video!


by ScegliAuto

More videos