Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the exhaust on a Triumph Trident 660, loosen the screws that secure it to its housing. These screws will be located at the exhaust supports, positioned on the right side relative to the rear wheel. Once these screws are loosened, you can widen the fixing ring that connects the exhaust to the remaining exhaust pipe. This will allow you to insert the new exhaust into its housing, securing it with the screws to the appropriate supports and connecting it to the remaining part of the exhaust system.

Updated on 27 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the exhaust on the Triumph Trident 660?
How to replace the exhaust on the Triumph Trident 660?
Trident 660 You can replace the exhaust on the Triumph Trident 660 by loosening the screws that secure the exhaust end can to its housing, located near the rear …
How to Replace the Exhaust on a Triumph Trident 660?
How to Replace the Exhaust on a Triumph Trident 660?
Trident 660 To replace the exhaust on a Triumph Trident 660, loosen the screws that secure it to the housing. These screws are located at the exhaust supports on…
How to Replace the Exhaust on a Triumph Trident 660?
How to Replace the Exhaust on a Triumph Trident 660?
Trident 660 The exhaust on the Triumph Trident 660 can be replaced by loosening the screws that secure it to the housing: these screws will be located at the sup…

Servicing a Honda SH300 Scooter

How to service the SH 300 scooter. This operation should be done with the engine cold. Remove the cover and take out the air filter, cleaning the compartment where the new one will be placed. Refit the three screws you removed earlier and reassemble the cover. Remove the oil cap, take a 12 mm spanner and unscrew the oil plug from underneath. Allow the oil to drain into a suitable container, which you will then dispose of at an authorised centre. Remove the filter, clean the cavity where the new one will be fitted, and tighten it with the spanner. Refit the oil cap screw. Always change the washer on the cap. Now, refill with oil. You will need a synthetic oil like Motul 5100 10W40, which costs £12.40 per litre on Amazon. If you are doing a complete change, you will need two cans, as you will require 1.6 litres including the filter. After adding the oil, let it rest for a few minutes, then run the engine for a few minutes and check the level. If necessary, top it up: it should be halfway between min and max.

Watch the video!


by ScegliAuto

More videos