|
Do it yourself
| |||
| ||||
How to Reset the Service Light on the Triumph Tiger 900?
Model: Triumph Tiger 900
Video tutorial
The procedure to reset the Service light on the Triumph Tiger 900 requires the use of a diagnostic tool: this must be connected to the OBD port located centrally on the bike, just under the seat. Once the scanner is connected, select the relevant bike model and corresponding version, proceeding to clear all errors that trigger the light. Once the errors have been completely reset, you can turn off the ignition to complete the operation.
Updated on 29 August 2026 by ScegliAuto
Related tutorials
Tiger 900
To reset the service light on the Triumph Tiger 900, loosen the screws securing the seat: once removed, you will find the OBD port underneath, which …
Tiger 900
In this tutorial, you will learn how to reset the service on the Triumph Tiger 900, a very simple and quick operation to perform only after completin…
Tiger 900
This guide briefly provides the instructions to remove and install the rear wheel of the Triumph Tiger 900. First, place your motorcycle on the centr…
|
How to Replace the Rear Brake Pads on the Kymco AK 550
You can replace the rear brake pads on the Kymco AK 550 by loosening the screws that secure the brake caliper in its housing: once these screws are loosened, you can detach the caliper from the disc so that the pads inside can be extracted. The pin that holds them in place must also be removed to allow the new pads to be installed: secure the new pads in the caliper, then reinstall the caliper onto the disc, ensuring everything functions correctly. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.006
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
