How to Reset the Service Light on a Triumph Tiger 900?

Model: Triumph Tiger 900
Part: Service warning light

This video is currently unavailable

To reset the service light on the Triumph Tiger 900, loosen the screws securing the seat: once removed, you will find the OBD port underneath, which needs to be connected to a diagnostic tool. After connecting the scanner to the port, select the motorcycle model and corresponding version.

By following the additional instructions provided, you can reset the errors and clear the maintenance interval. Once completed, disconnect the scanner and refit the seat.

Updated on 13 September 2026 by ScegliAuto

Related tutorials

How to Reset the Service Light on the Triumph Tiger 900?

Tiger 900 The procedure to reset the Service light on the Triumph Tiger 900 requires the use of a diagnostic tool: this must be connected to the OBD port locat…

How to Reset the Service on the Triumph Tiger 900?

Tiger 900 In this tutorial, you will learn how to reset the service on the Triumph Tiger 900, a very simple and quick operation to perform only after completin…

How to Remove and Install the Rear Wheel of the Triumph Tiger 900

Tiger 900 This guide briefly provides the instructions to remove and install the rear wheel of the Triumph Tiger 900. First, place your motorcycle on the centr…

How to Replace the Rear Brake Pads on the Kymco AK 550

You can replace the rear brake pads on the Kymco AK 550 by loosening the screws that secure the brake caliper in its housing: once these screws are loosened, you can detach the caliper from the disc so that the pads inside can be extracted. The pin that holds them in place must also be removed to allow the new pads to be installed: secure the new pads in the caliper, then reinstall the caliper onto the disc, ensuring everything functions correctly.

Watch the video!

by ScegliAuto

How to Reset the Service Light on a Triumph Tiger 900?

Related tutorials

How to Replace the Rear Brake Pads on the Kymco AK 550

More videos