Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial, you will see how to change the engine oil on a Triumph Bonneville T120, a very simple and quick operation. First, ensure that the engine is sufficiently cool, then position a container underneath the motorcycle, locate the drain hole bolt, and unscrew it using an Allen key. Wait for all the oil in the system to drain out, then proceed to unscrew the old filter and tighten both the replacement and the bolt. At this point, simply pour in the new oil through the designated upper hole.

Updated on 22 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil and Oil Filter on a Triumph Bonneville T120
How to Change the Engine Oil and Oil Filter on a Triumph Bonneville T120
Bonneville T120 Regularly servicing your motorcycle ensures the engine operates correctly over time; here’s how to change the engine oil and oil filter on a Triumph …
How to Replace the Coolant in a Triumph Bonneville T120?
How to Replace the Coolant in a Triumph Bonneville T120?
Bonneville T120 In this guide, we will look at the main steps to replace the coolant or antifreeze in a Triumph Bonneville T120 motorcycle. First, remove the seat of…
How do you replace the rear brake pads of the Triumph Bonneville T120?
How do you replace the rear brake pads of the Triumph Bonneville T120?
Bonneville T120 In order to replace the rear brake pads of the Triumph Bonneville T120, you need to loosen the screws that secure the brake caliper to its housing, w…

How to Reset the Engine Oil Light on a Yamaha XMax 250

This short video demonstrates the procedure to reset the engine oil light on a Yamaha XMax 250 scooter. The operation is very simple and quick; first, insert the motorcycle key into the designated slot and turn it to the first position to power on the instrument panel without starting the vehicle. At this point, you will see the light on the display; simply press the "oil change" button located at the centre of the motorcycle's speedometer and hold it until the light stops flashing. The operation will then be complete; to verify success, turn off and then turn on the instrument panel.

Watch the video!


by ScegliAuto

More videos