Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Engine Oil of the Triumph Speed Twin?

Model: Triumph Speed Twin
Part: Engine oil

Video tutorial

To replace the engine oil of the Triumph Speed Twin, loosen the drain plug located at the central bottom of the bike's oil sump. Once this plug is removed, allow all the used oil to flow into a suitably positioned container.

At this point, you can also remove the oil filter, which is in the same location, so you can fit the new replacement part. After the replacement, top up with new oil through the breather on the right side.


Updated on 13 October 2026 by ScegliAuto


Related tutorials

Replacing Engine Oil and Oil Filter on a Triumph Speed Twin
Replacing Engine Oil and Oil Filter on a Triumph Speed Twin
Speed Twin In this video, see how to replace the engine oil and oil filter as part of the regular maintenance service on a Triumph Speed Twin. First, drain the …
How to Replace the Engine Oil and Oil Filter on the Triumph Speed Twin
How to Replace the Engine Oil and Oil Filter on the Triumph Speed Twin
Speed Twin Regular maintenance is essential; here’s how to change the engine oil and oil filter on the Triumph Speed Twin. First, place the motorcycle on its st…
How to Change the Engine Oil and Oil Filter on a Triumph Speed Twin 900
How to Change the Engine Oil and Oil Filter on a Triumph Speed Twin 900
Speed Twin These brief instructions will show you how to perform routine maintenance by changing the engine oil and oil filter on a Triumph Speed Twin 900. Firs…

How to Remove the Rear Wheel of the GasGas EC 250?

To remove the rear wheel of the GasGas EC 250, first dismantle the chain by removing it from the sprocket attached to the rear wheel. Once the chain is removed, you can unscrew the nut that secures the rear wheel spindle and holds it to the swingarm. When the securing spindle is removed, you can completely take out the wheel from its housing and replace it with a new spare part. After replacement, refit the securing spindle and reposition the chain around the sprocket.

Watch the video!


by ScegliAuto

More videos