Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Headlight on the UAZ Patriot?

Model: UAZ Patriot MK 1 - Years 2005-2022
Part: Tail light

In this tutorial, you will see how to remove the rear headlight on the UAZ Patriot to replace a burnt-out bulb or the headlight itself. First, open the trunk. Then, remove the panel located at the back of the headlight after unlocking the clips. Next, use a long socket wrench to remove the 4 inner nuts, then grasp the headlight and pull it out of the body towards you. Once done, disconnect the power connector and proceed with replacing the damaged component. To remove a bulb, simply rotate it counterclockwise.

Updated on 24 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Tail Lights on a UAZ Patriot?
How to Remove the Tail Lights on a UAZ Patriot?
UAZ Patriot (2005-2022 / MK 1) In this tutorial, we will see how to remove the tail lights on a UAZ Patriot, a very simple and quick operation. First, make sure the key is not in t…
How to Replace the Door Lock on a UAZ Patriot
How to Replace the Door Lock on a UAZ Patriot
UAZ Patriot (2005-2022 / MK 1) To replace the door lock on a UAZ Patriot, open the door to access the component located on the side of the door. Here, you will remove the screws th…
Replacing the Air Filter on the Uaz Patriot
Replacing the Air Filter on the Uaz Patriot
UAZ Patriot (2005-2022 / MK 1) In this video tutorial, you will see how to remove and replace the engine air filter on the Uaz Patriot, following the instructions below. First, ope…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos