Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Air Filter on Valenti SM 50 2020

Model: Valenti Racing Sm 50
Part: Air filter

This video is currently unavailable

In this video, learn how to disassemble and replace the engine air filter on a Valenti SM 50 motorcycle in simple and quick steps. First, remove the seat by unscrewing the two fixing screws found on both sides; then, remove the battery by disconnecting the terminals (positive and negative), and unscrew the central nut of the air filter.

At this point, you can remove it and replace it with a new one or proceed with cleaning it properly; then, simply reassemble everything by applying the reverse procedure!


Updated on 30 April 2026 by ScegliAuto


Related tutorials

Sm 50 To replace the air filter on the Sherco SM 50, remove the side panels of the bike to access the internal components under the seat. Here you will fin…

How to change the engine oil of a Yamaha MT-07?

To change the engine oil of a Yamaha MT-07, follow these steps. Start by placing the bike on a flat surface and ensure the engine is warm but not too hot. Remove the oil cap from the top of the engine and unscrew the oil drain plug on the engine casing, usually located on the underside of the engine. Position a collection container under the drain plug and unscrew the plug to completely drain the used oil. Once drained, refit the drain plug. Remove and replace the oil filter using an oil filter spanner. Apply a little new oil to the seal of the new filter before installation. Fill the engine with new oil through the oil opening until reaching the recommended level. Check the oil level using the dipstick and add oil if necessary. Refit the oil cap and ensure it is securely tightened. Start the engine and let it run for a few minutes to distribute the oil, and you will have completed the procedure.

Watch the video!


by ScegliAuto

More videos