Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Today we will explain how to clean the fork from the dirt that forms under the dust seals when the fork is compressed; to perform this operation we need to use the plastic tool called Fork Seal Doctor, which can be purchased online for 13,12€. We remove the seal at the base using a flat tip screwdriver and insert our cleaning tool. By rotating the tool clockwise we will remove the dirt and excess dust, it is normal to see a little oil come out after removing the seal. Once the cleaning is done, we reassemble the seal.

Posted on 27 June 2025 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Ignition Switch on a Typhoon Scooter and Similar Models
Replacing the Ignition Switch on a Typhoon Scooter and Similar Models
(Various brands) Various In this video tutorial, see how to replace the ignition switch on an old model Typhoon scooter and similar models. If you have the frame already disa…
How to Change a Motorcycle Sprocket
How to Change a Motorcycle Sprocket
(Various brands) Various The sprocket is one of the motorcycle components most subject to wear, so it is important to know how to change it. After placing the motorcycle on a…
How to Replace the Water/Oil Pump Seal on a Kawasaki Motorcycle
How to Replace the Water/Oil Pump Seal on a Kawasaki Motorcycle
(Various brands) Various How to replace the water/oil pump seal on a Kawasaki motorcycle. First, remove the cover, take off the underlying cap, and then the sealing disc and …

How to Replace the Front Headlight on the BMW F800GS

In this tutorial, you will see how to replace the front headlight on the BMW F800GS, an extremely simple and quick operation. First, ensure the key is not inserted for safety, then locate the power connector at the back of the headlamp and disconnect it by pressing the clip. Next, unscrew the two side bolts using a Torx T40 key, grasp the headlight and pull it away from the support. At this point, you can insert the replacement, tighten the two bolts, and reconnect the power connector.

Watch the video!


by ScegliAuto

More videos