Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In order to replace the front brake pads of the Triumph Trophy SE, you need to loosen the screws that secure the brake caliper to its corresponding disc: once the caliper screws are loosened, you can detach it from the disc in order to remove the pads from inside the caliper. Once these pads are removed, you can insert the new ones and secure them with the corresponding pin. At this point, you can reposition the caliper on the disc, tighten it again, and check that everything is working properly.

Posted on 19 January 2025 by ScegliAuto

Video tutorial

Related tutorials

Where is the Gear Position Sensor on the Triumph Trophy 900?
Where is the Gear Position Sensor on the Triumph Trophy 900?
Trophy 900 To replace the gear position sensor on the Triumph Trophy, loosen the screws that secure the fairing on the left side of the bike so that it can be c…
How to Change the Engine Oil of the Triumph Trophy 900
How to Change the Engine Oil of the Triumph Trophy 900
Trophy 900 To change the engine oil of the Triumph Trophy 900, first, remove the drain plug located at the central lower part of the bike. Once the plug is loos…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos