Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the side fairings on the Yamaha R6?

Model: Yamaha Yamaha R 6
Part:

Video tutorial

In this tutorial we can see how to disassemble the side fairings on the Yamaha R6, an extremely simple and fast operation. First of all, we identify the plastic rivets indicated, then unlock them using, for example, a small screwdriver with a flat tip. We then unscrew the various fixing bolts using a 4mm hex key, disconnect the turn signal power connector and separate the fairing from the frame.

Finally, we repeat the operation on the opposite side, if necessary, and install any replacement parts following exactly the reverse procedure.


Posted on 19 January 2025 by ScegliAuto


Related tutorials

How to replace the air filter on a Yamaha R6?
How to replace the air filter on a Yamaha R6?
Yamaha R 6 To replace the air filter on a Yamaha R6, you need to pry off the fairings located on either side of the fuel tank using a tool. Once the screws loca…
How do you replace the motor oil of the Yamaha R6?
How do you replace the motor oil of the Yamaha R6?
Yamaha R 6 It will be possible to replace the motor oil of the Yamaha R6 by loosening the screws that fasten the side panels of the motorcycle fairing: once the…
How to Replace the Exhaust on a Yamaha R6?
How to Replace the Exhaust on a Yamaha R6?
Yamaha R 6 You can replace the exhaust on the Yamaha R6 by unscrewing the screws that secure the exhaust terminal to the corresponding housing on the right side…

How to Remove the Rear Wheel of the GasGas EC 250?

To remove the rear wheel of the GasGas EC 250, first dismantle the chain by removing it from the sprocket attached to the rear wheel. Once the chain is removed, you can unscrew the nut that secures the rear wheel spindle and holds it to the swingarm. When the securing spindle is removed, you can completely take out the wheel from its housing and replace it with a new spare part. After replacement, refit the securing spindle and reposition the chain around the sprocket.

Watch the video!


by ScegliAuto

More videos