Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this guide, we will see the main instructions useful for disassembling and replacing the sprocket and pinion of the Ducati Streetfighter V4S motorcycle. First of all, we put the motorcycle on the stand and start disconnecting the transmission chain, using the appropriate tool; then we unscrew the nuts of the sprocket with a socket wrench, removing it from the main shaft, as shown in the video. At this point, we also remove the pinion, replacing and installing the new transmission elements; make sure to give the right torque, following the video tutorial until the end!

Posted on 20 January 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the air filter of the Ducati Streetfighter V4S?
How do you replace the air filter of the Ducati Streetfighter V4S?
Streetfighter V4 S To replace the air filter of the Ducati Streetfighter V4S, you will need to loosen the screws that secure the cover of the filter box: this will be l…
How to Remove the Front and Rear Wheel of a Ducati Streetfighter V4S
How to Remove the Front and Rear Wheel of a Ducati Streetfighter V4S
Streetfighter V4 S Today's steps will show you the procedure for removing and replacing the front and rear wheels of the Ducati Streetfighter V4S. First, place the bike…
How do you replace the levers on the Ducati Streetfighter V4 S?
How do you replace the levers on the Ducati Streetfighter V4 S?
Streetfighter V4 S It will be possible to replace the levers of the Ducati Streetfighter V4 S by loosening the nuts that secure the levers to their housing: these nuts …

How to Replace the Battery in the Royal Enfield Classic 350?

Replacing the battery in the Royal Enfield Classic is an extremely simple and quick operation. First, ensure the key is not inserted for safety. Locate the small panel on the left side, then insert the key into the corresponding cylinder and unlock the lock. Once the panel is removed, unclip the various wiring clips, remove the fuse box, and take the battery out of its housing. Now, disconnect the terminals, connect them to the replacement battery, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos