Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Water Pump on a Ducati Streetfighter V4

Model: Ducati Streetfighter V4 S
Part: Pump

Video tutorial

Below, we will discover the steps to remove and replace the water pump on a Ducati Streetfighter V4. First, place the bike on a stand and begin draining the coolant by unscrewing the drain screw; also drain the oil and then remove the side cover, as shown in the video.

At this point, unscrew the screws of the water pump, removing the entire impeller and replacing it with the new original one; correctly reassemble all components and the pump gear, finally topping up with new fluids.


Posted on 13 April 2026 by ScegliAuto


Related tutorials

How to Replace the Front Brake Pads on a Ducati Streetfighter V4 S
How to Replace the Front Brake Pads on a Ducati Streetfighter V4 S
Streetfighter V4 S To replace the front brake pads on a Ducati Streetfighter V4 S, loosen the bolts that secure the brake caliper to detach it from the brake disc. Once…
Engine Oil and Oil Filter Replacement for Ducati Streetfighter V4 S
Engine Oil and Oil Filter Replacement for Ducati Streetfighter V4 S
Streetfighter V4 S In this guide, you will learn the main steps to remove the oil filter and replace the engine oil of a 2020 Ducati Streetfighter V4 S. First, remove t…
How to Replace the Air Filter on a Ducati Streetfighter V4 S?
How to Replace the Air Filter on a Ducati Streetfighter V4 S?
Streetfighter V4 S To replace the air filter on a Ducati Streetfighter V4 S, loosen the screws securing the front cover located just below the fuel tank and behind the …

How to Change the Engine Oil on a Kawasaki Ninja 650?

To change the engine oil on a Kawasaki Ninja 650, it is important to start by warming up the engine for a few minutes, so the oil becomes more fluid and easier to drain. Position the bike on a stable stand, such as a centre or side stand. Locate the oil drain plug at the bottom of the engine and place a container underneath to collect the used fluid. Carefully unscrew the plug, allowing the old oil to drain completely. Once emptied, screw the plug back in, ensuring it is tight to avoid leaks. Proceed to add new oil through the top opening of the reservoir, following the type and quantity recommended by the manufacturer. After filling, start the engine to circulate the fresh oil, then turn it off and check the level, adding more if necessary to reach the optimal level.

Watch the video!


by ScegliAuto

More videos