Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Today's steps will show you the procedure for removing and replacing the front and rear wheels of the Ducati Streetfighter V4S. First, place the bike on a stand and start loosening the central nut of the front wheel; then unscrew the bolts of the front brake calipers to remove them from the discs, as shown in the video. At this point, also remove the front wheel and replace the tyre if necessary; to remove the rear wheel, simply unscrew the central nut, removing the split pin, following the video tutorial to the end!

Updated on 19 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the crown and pinion of the Ducati Streetfighter V4S
How to replace the crown and pinion of the Ducati Streetfighter V4S
Streetfighter V4 S In this guide, we will see the main instructions useful for disassembling and replacing the sprocket and pinion of the Ducati Streetfighter V4S motor…
How do you replace the air filter of the Ducati Streetfighter V4S?
How do you replace the air filter of the Ducati Streetfighter V4S?
Streetfighter V4 S To replace the air filter of the Ducati Streetfighter V4S, you will need to loosen the screws that secure the cover of the filter box: this will be l…
Replacing the Water Pump on a Ducati Streetfighter V4
Replacing the Water Pump on a Ducati Streetfighter V4
Streetfighter V4 S Below, we will discover the steps to remove and replace the water pump on a Ducati Streetfighter V4. First, place the bike on a stand and begin drain…

How to Replace the Battery in the Royal Enfield Classic 350?

Replacing the battery in the Royal Enfield Classic is an extremely simple and quick operation. First, ensure the key is not inserted for safety. Locate the small panel on the left side, then insert the key into the corresponding cylinder and unlock the lock. Once the panel is removed, unclip the various wiring clips, remove the fuse box, and take the battery out of its housing. Now, disconnect the terminals, connect them to the replacement battery, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos