Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial we can see how to replace the engine oil in the Zontes 350 X1, an extremely simple and quick operation. First of all, make sure that the engine is sufficiently cold to operate safely, then locate the drain plug and unscrew it using a 14mm socket wrench. Let all the oil in the system drain out, open the filter cap with a 10mm wrench and insert the replacement. At this point, all that's left to do is reassemble everything and pour the necessary amount of oil through the designated upper hole.

Posted on 25 October 2025 by ScegliAuto

Video tutorial

Related tutorials

Everything we need to know about changing the engine oil of a car
Everything we need to know about changing the engine oil of a car
(Various brands) Various Engine oil has the task of lubricating the engine gears and preventing corrosion. Engine oil should be replaced as often as possible to prevent too c…
The Easiest Way to Top Up Engine Oil
The Easiest Way to Top Up Engine Oil
(Various brands) Various In this video, learn how to easily top up engine oil when necessary and without a funnel. Pouring oil into the engine oil reservoir without a tool to…
How to Change the Engine Oil in the Triumph T100?
How to Change the Engine Oil in the Triumph T100?
(Various brands) Various Change the oil in the Triumph T100 with the engine warm. Start the bike, wait for the engine to warm up, then switch it off and place it on the side …

    Frequently Asked Questions

    • Vari - How much oil is needed for the Harley-Davidson Fat Boy? Read answer
    • Vari - What does the "Oil Insp" message mean? Read answer

How to replace the headlight bulbs on a Suzuki GSXR 600?

In this tutorial, you will see how to replace the headlight bulbs on a Suzuki GSXR 600, an extremely simple and quick operation. First, ensure that the key is not inserted, then unscrew the two indicated screws and separate the dashboard from the support. Next, disconnect the power connectors of the bulbs, remove the rubber caps, and unclip the metal clips to extract the bulbs from their respective housings. At this point, you can insert the replacements, avoiding touching the glass directly with your bare hands, and follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos