Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Engine Oil in the Triumph T100?

Model: (Various brands) Various
Part: Engine oil

Video tutorial

Change the oil in the Triumph T100 with the engine warm. Start the bike, wait for the engine to warm up, then switch it off and place it on the side stand.

Locate the oil drain plug under the engine and remove it using a 17 mm spanner. Allow the old oil to drain into a suitable container while you replace the oil filter.

Remember to change the gasket as well. Tighten the oil drain plug again, then add new engine oil through the designated filler.


Updated on 19 July 2026 by ScegliAuto


Related tutorials

(Various brands) Various Replacing the key battery on a Triumph motorbike is really simple, a task that anyone can perform without needing to go to a workshop. To do this, si…
(Various brands) Various Let's see how to change the oil and filter in the Chrysler Grand Voyager. Lift the vehicle with a suitable jack, remove the lower engine cover, and l…
(Various brands) Various How to replace the engine oil in your car? Let’s look at the oil and filter replacement. Lift the front bonnet of the car and secure it, then locate …

Other guides you may be interested in

    Frequently Asked Questions

    • Vari - What does the "Oil Insp" message mean? Read answer

How to open the boot if it is stuck on a Mercedes B-Class?

On the Mercedes B-Class, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In this case, perform the emergency opening by following the simple procedure shown in this tutorial. First, unlock the locks with the remote control, then open the rear doors and, by operating the indicated lever, lower the backrest of the seat. Next, go inside the boot, locate the indicated gap, and manually unlock the lock using a small screwdriver.

Watch the video!


by ScegliAuto

More videos