Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change Engine Oil in Grand Voyager

Model: (Various brands) Various
Part: Engine oil

Let's see how to change the oil and filter in the Chrysler Grand Voyager. Lift the vehicle with a suitable jack, remove the lower engine cover, and locate the oil filter. Unscrew the large container where the oil filter is located, and extract the worn oil filter. Unscrew the bolt from the oil sump to drain the oil: let it flow into a container. Screw in the new engine oil filter. Lower the car and lift the front bonnet to top up with new oil. Replace the oil filter with one identical to the original.

Updated on 4 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Key Battery in the Pontiac Grand Am
How to Replace the Key Battery in the Pontiac Grand Am
(Various brands) Various If you want to learn how to replace the battery in your Pontiac Grand Am remote, you are in the right place. Below, we will describe step by step all…
How to Change the Engine Oil in the Triumph T100?
How to Change the Engine Oil in the Triumph T100?
(Various brands) Various Change the oil in the Triumph T100 with the engine warm. Start the bike, wait for the engine to warm up, then switch it off and place it on the side …
Replace Engine Oil in Your Car
Replace Engine Oil in Your Car
(Various brands) Various How to replace the engine oil in your car? Let’s look at the oil and filter replacement. Lift the front bonnet of the car and secure it, then locate …

Other guides you may be interested in

    Frequently Asked Questions

    • Vari - How much oil is needed for the Harley-Davidson Fat Boy? Read answer
    • Vari - What does the "Oil Insp" message mean? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos