Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Change Light on a Yamaha Majesty 250

Model: (Various brands) Various
Part: Service warning light

If you have personally changed the engine oil and filter on this scooter model, you need to finish the job by resetting the oil change light on the dashboard. To do this, follow the instructions below and also check the video. First, insert the key into the ignition and turn on the dashboard. On the left side of the display, where the oil change indicator is flashing, there is a button that you need to press and hold for a few seconds until the oil change light turns off.

Updated on 29 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Spark Plug on a Yamaha Majesty 250 Motorcycle
How to Replace the Spark Plug on a Yamaha Majesty 250 Motorcycle
(Various brands) Various To change the spark plug on the Yamaha Majesty 250 motorcycle, remove the under-seat panel by unscrewing the four 10mm bolts as shown in the video. T…
How to Reset the Oil Light on the Yamaha Xmax 250
How to Reset the Oil Light on the Yamaha Xmax 250
(Various brands) Various Resetting the oil light on the 2007 Yamaha Xmax 250 is a very simple operation that you can carry out independently. It is important to reset the lig…
How do you replace the fuel pump of the Yamaha Majesty?
How do you replace the fuel pump of the Yamaha Majesty?
(Various brands) Various Let's see specifically how to replace the fuel pump, which could burn out over time, of a motorcycle, specifying that in this case the video shows a …

Other guides you may be interested in

    Frequently Asked Questions

    • Vari - What does the Service light on the KTM Duke 200 indicate? Read answer
    • Vari - How do you reset the Service light on an Aixam? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos