Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Change Warning Light on the Yamaha X-max

Model: (Various brands) Various
Part: Service warning light

After changing the engine oil and the corresponding filter on this scooter, you need to reset the oil change warning light on the dashboard. Follow the instructions provided here and check the video for guidance. First, turn on the ignition and press the button on the right handlebar to scroll through the onboard computer functions until you reach the mileage remaining until the next oil change. Then, press the reset button located in the centre of the instrument panel for 3 seconds, and press it again for at least 20 seconds until the next service data is updated.

Updated on 12 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Warning Light on the Yamaha X Max 300
How to Reset the Oil Warning Light on the Yamaha X Max 300
(Various brands) Various To reset the oil warning light on the Yamaha X Max 300, follow these steps: Turn off the ignition of the X Max, press and hold the mode and set butto…
How to Reset the Oil Change Light on a Yamaha Majesty 250
How to Reset the Oil Change Light on a Yamaha Majesty 250
(Various brands) Various If you have personally changed the engine oil and filter on this scooter model, you need to finish the job by resetting the oil change light on the d…
How to Reset the Oil Light on the Yamaha Xmax
(Various brands) Various Whenever you change the engine oil on this type of motorcycle, you must also reset the service light that appears on the dashboard. The description b…

Other guides you may be interested in

    Frequently Asked Questions

    • Vari - What does the Service light on the KTM Duke 200 indicate? Read answer
    • Vari - How do you reset the Service light on an Aixam? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos