Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. (Various brands)
    3. :
  3. Various
    4. : How to reset the oil light on the Yamaha Xmax 250.

(Various brands) Various - Video tutorial

Model: (Various brands) Various
Part: Oil filter
Operation: How to reset the oil light on the Yamaha Xmax 250.

Resetting the oil light on a 2007 Yamaha Xmax 250 is a very simple operation that can be done independently. It is important to reset the light only after performing the regular maintenance. Turn on the ignition without starting the engine and press both buttons on the scooter dashboard simultaneously for a few seconds. After a while, the light will stop flashing. Turn off the scooter and turn on the ignition again to verify that the operation was successful. If the light does not turn off for any reason, then a diagnosis should be performed.


Posted on 7 April 2023 by ScegliAuto

    Frequently Asked Questions

    • Vari - Where is the oil filter located on the Peugeot Satelis 125i? Read Answer
    • Vari - Where is the engine oil filter located? Read Answer
    • Vari - What is the location of the oil filter on the Yamaha Yfz 450? Read Answer
    • Vari - How much does it cost to replace the oil filter on cars with a 1.3 MultiJet engine? Read Answer
    • Vari - How many km do you replace the oil filter on the Honda X-Adv? Read Answer
    • Vari - Why is the oil filter blocked? Read Answer
    • Vari - Where is the oil filter located? Read Answer
    • Vari - Where is the Benelli TRK 251 engine oil filter located? Read Answer
    • Vari - Where is the Ford Ranger 3.2 cc oil filter located? Read Answer
    • Vari - Where is the engine oil filter located in a Ford Ranger? Read Answer
    • Vari - Every how many km it is necessary to change the oil filter Read Answer
    • Vari - Where is the oil filter cartridge located on the MultiJet engine? Read Answer
    • Vari - Where is the oil filter generally located? Read Answer
    • Vari - Where is the oil filter located? Read Answer

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos