Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace Engine Oil in Your Car

Model: (Various brands) Various
Part: Engine oil

How to replace the engine oil in your car? Let’s look at the oil and filter replacement. Lift the front bonnet of the car and secure it, then locate the oil filter (if present in the engine bay). Unscrew the filter located in the engine bay or underneath the vehicle. Raise the car on a column lift or jack, then use a socket spanner to unscrew the bolt of the oil sump (after removing the plastic protective panel), allowing the fluid to drain into a disposal container and refit the sump bolt. After removing the oil from the engine, lower the car and top up the engine with new oil.

Updated on 17 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Car Oil
How to Change the Car Oil
(Various brands) Various How do you change the engine oil in your car? Here’s how to change the oil and filter in the car. Open the car door and pull up the engine compartmen…
How to Change Engine Oil in Grand Voyager
How to Change Engine Oil in Grand Voyager
(Various brands) Various Let's see how to change the oil and filter in the Chrysler Grand Voyager. Lift the vehicle with a suitable jack, remove the lower engine cover, and l…
How to Check the Engine Oil of Your Car
How to Check the Engine Oil of Your Car
(Various brands) Various Checking the engine oil of your car is very simple, but there are precautions to follow, especially after prolonged stops. Open the bonnet and lift t…

Other guides you may be interested in

    Frequently Asked Questions

    • Vari - How much oil is needed for the Harley-Davidson Fat Boy? Read answer
    • Vari - What does the "Oil Insp" message mean? Read answer

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos