Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Car Oil

Model: (Various brands) Various
Part: Engine oil

Video tutorial

How do you change the engine oil in your car? Here’s how to change the oil and filter in the car. Open the car door and pull up the engine compartment release lever located at the bottom left of the dashboard, then lift the front bonnet and secure it. Unscrew the large securing bolt of the container cap where the oil filter is located, extract the worn oil filter, and position a new one. Remove the filter under the engine compartment if it is located there.

Lift the car on a jack and unscrew the bolt of the oil sump; allow the fluid to drain into a container.

Refill with new oil after maintenance.


Updated on 12 April 2026 by ScegliAuto


Related tutorials

How to Change the Oil in Your Car?
How to Change the Oil in Your Car?
(Various brands) Various Are you new to DIY maintenance on your car and unsure how to change the oil? Don’t panic, follow the steps in this video and the advice provided, and…
Common Mistakes When Changing Oil in a Car Yourself
Common Mistakes When Changing Oil in a Car Yourself
(Various brands) Various Here are the most common mistakes when changing oil yourself: the first is, of course, not doing it in a timely manner, but delaying it, whereas it i…
What are the Symptoms of a Faulty MAP Sensor?
What are the Symptoms of a Faulty MAP Sensor?
(Various brands) Various If the MAP sensor is not functioning, the ECU does not know how much air is entering the engine and miscalculates the air/fuel mixture. Here are the …

Other guides you may be interested in

    Frequently Asked Questions

    • Vari - What does the "Oil Insp" message mean? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos