Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you register the door of a car?

Model: (Various brands) Various
Part: Car door

It may happen that at some point the door of your car is not perfectly aligned, and this can be noticed by some factors, such as difficulty in opening and closing, rain leaks, and so on. A first check, taking inspiration from the video tutorial available here, can be done with a ruler, in order to ensure the alignment between the two doors, front and rear. Then, you can act on the stop of the door, often the cause of such inconveniences, by loosening the locking pins, moving it gradually and, after perfectly identifying the correct position, locking it again.

Posted on 23 June 2025 by ScegliAuto

Video tutorial

Related tutorials

How is the tachograph used?
How is the tachograph used?
(Various brands) Various To use the tachograph, you must first insert the tachograph card into the appropriate slot with the chip facing inward: this way, the device will rec…
How to Remove the Door Lock
How to Remove the Door Lock
(Various brands) Various Do you want to remove the door lock of your car? If you want to replace the car lock, it is important to first remove the door trim panel. Remove var…
Removing the External Door Handle
Removing the External Door Handle
(Various brands) Various Is the external door handle damaged? Here’s how to remove and replace the handle. Open the car door, then unscrew the screws on the plastic trim of t…

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos