Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Door Mirror

Model: (Various brands) Various
Part: Side mirror

Video tutorial

Let's look at the removal and replacement of the mirror on your car. Remove the internal trim part of the mirror (there are plastic clips), unscrew the securing screws located above the car door. Once the securing pins are removed, take out the mirror with the electric adjustment cables from the car door.

Fit the mirror back into the car door, screw in the securing screws, connect the adjustment cables, and replace the plastic trim. Test the mirror's correct operation.

After fitting the mirror, all that remains is to adjust it to your preferred position.


Updated on 9 April 2026 by ScegliAuto


Related tutorials

How to Replace a Side Mirror
(Various brands) Various This replacement is quite similar for most vehicles. Open the door where the work will be done and remove the triangle cover at the mirror adjustment…
How to remove the external rear-view mirror from an Audi
How to remove the external rear-view mirror from an Audi
(Various brands) Various Removing the external rear-view mirror from the Audi E Tron is very simple to do on your own. The first thing to do is open the door of the desired p…
How to Replace the Wing Mirror
How to Replace the Wing Mirror
(Various brands) Various To remove and extract the external wing mirror, you will need to perform some preliminary steps, such as removing the panel that covers the inside of…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos