Do it yourself
Frequently asked questions about cars and motorcycles
Learn how to remove the handlebar riser for fitting the rear-view mirror on the motorcycle (left side). Unscrew the riser clamp bolt. Once the clamp bolt is loosened, unscrew it by hand. For fitting: screw the mirror onto the bolt in the thread located inside the riser at the handlebar; hold the mirror with one hand and tighten the bolt with the Allen key until it expands the thickness inside. Finally, test the correct functioning of the mirror, adjusting the view while sitting on the bike and the angle of the mirror.

Updated on 9 March 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

(Various brands) Various .. Is the car rear-view mirror damaged? Remove it from above the mirror and replace it. You can also repair it. Pry between.. …
(Various brands) Various .. how to remove the glass from the external rear-view mirror of a generic car; the procedure may differ for newer or higher-value cars. First, adjust.. …
(Various brands) Various .. Removing the interior rear view mirror of a vehicle is a very simple and quick operation to carry out independently. To remove it,.. …

How to Replace the Headlight Bulbs on the KTM RC 200?

As shown in this tutorial, replacing the headlight bulbs on the KTM RC 200 is an extremely simple and quick task. First, ensure that the key is not inserted for safety. Then, approach the headlight in question, locate the bulb holder, and turn it slightly counter-clockwise. Once done, disconnect the power connector, attach the new bulb, and reassemble everything. Avoid touching the glass of the replacement bulb directly with your bare hands, as any residues could cause it to overheat.

Watch the video!


by ScegliAuto

More videos