Do it yourself
Frequently asked questions about cars and motorcycles
The adjustment process is based on a screw located on the carburettor or throttle body. The primary aim is to find the exact RPM of the engine at idle to improve fuel consumption and achieve perfect balance. This principle applies to any motorcycle model, as the adjustment screw does not differ. To proceed, after allowing the engine to warm up, use a small screwdriver or your hands if possible, to turn the screw clockwise to increase RPM or counterclockwise to decrease it, thus achieving the optimal result.

Posted on 17 September 2026 by ScegliAuto

Video tutorial

Related tutorials

(Various brands) Various In this video, learn how to adjust the idle of a carburettor. To do this, increase the airflow using a tapered needle. To prevent a lean mixture from…
(Various brands) Various Choosing the right oil for your gearbox is a really difficult thing, but this video comes to our aid, giving us some useful advice: starting from mot…
(Various brands) Various Let’s look at the causes of an irregular idle: if there is a misfire, a cylinder may not be burning well or not burning at all, and the causes could …

How to replace the coolant in the BMW S1000 R

Today, we will see in this video tutorial how to bleed and replace the coolant in the BMW S1000 R motorcycle. First, place your motorcycle on a stand and start unscrewing the bleed screw located on the water pump casing, found at the bottom right; let the fluid drain into a container for about ten minutes. Now, unscrew the radiator cap and top up with the new coolant, the correct type for your radiator; fill it to the maximum level mark, starting the engine to circulate the fluid!

Watch the video!


by ScegliAuto

More videos