Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the KTM Duke 200

Model: (Various brands) Various
Part: Service warning light

This video is currently unavailable

Resetting the service light on the KTM Duke 200 is very simple. You can perform this operation independently as it will only take a few minutes and can be done in a few steps.

First, insert the key into the ignition and turn on the instrument panel without starting the engine. Then, press the settings button and hold down the "preferences" button located at the top left.

After that, press the up and down buttons to set the new interval, and finally, turn off the bike's ignition.


Updated on 27 July 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on KTM Duke 390
How to Reset the Service Light on KTM Duke 390
(Various brands) Various In this short video tutorial, you can see how to reset the service light on the KTM Duke 390. The first step is to change the engine oil and filters.…
How do you reset the service light on the KTM 1290?
How do you reset the service light on the KTM 1290?
(Various brands) Various The reset of the service light on the KTM 1290 motorcycle, just like in cars, does not require going to the workshop to be done, as it can be done in…
How to Perform a Basic Service on a KTM Duke 790
How to Perform a Basic Service on a KTM Duke 790
(Various brands) Various For our safety on the road, it is very important to carry out a service on cars and motorcycles. Today, this tutorial will explain how to perform a "…

    Frequently Asked Questions

    • Vari - How do you reset the Sym Fiddle's oil warning light? Read answer
    • Vari - How do you reset the Service light on an Aixam? Read answer

How to Replace the Brake and Clutch Levers on a Kawasaki Z750

Briefly follow these instructions to remove and replace the front brake and clutch levers on the Kawasaki Z750 motorcycle. First, place your motorcycle on a stand and start by unscrewing the pin for the front brake lever, loosening the nut located at the bottom; remove and replace the lever with a new one, securing it properly and finally adjusting the lever travel as shown in the video. Similarly, replace the clutch lever by unscrewing the pin; in this case, attach the metal cable to the lever and make the adjustment using the adjuster!

Watch the video!


by ScegliAuto

More videos