Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Perform a Basic Service on a KTM Duke 790

Model: (Various brands) Various
Part: Oil filter

Video tutorial

For our safety on the road, it is very important to carry out a service on cars and motorcycles. Today, this tutorial will explain how to perform a "basic service", which includes checking/changing the oil and filter on a 2018 KTM Duke 790; this same procedure can also be used on a 890. The first step is to start the motorcycle to allow the oil to drain more quickly.

To change the oil filter, remove the protective cap and unscrew the two filter units to let the remnants of the old oil drain out. It is very important to collect the oil in a container during this operation and dispose of it according to your local council's instructions.

After removing the two filter units, unscrew the filter cover to remove it completely.

When you notice that no more oil is draining out, you can replace the filter by following the same procedure used for removal. At this point, you can reinsert the two units.

After completing this operation, add the oil; generally, this motorcycle takes 2.8 litres. When you perform these steps, the service light will appear on the motorcycle's display; to remove it, go to the menu - trips and data, use the selector to navigate to settings, and then press the up and down arrows simultaneously to clear the light.

You can also adjust the service interval from 15,000 km to 7,500 km.


Updated on 24 August 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on the KTM 790?
How to Reset the Service Light on the KTM 790?
(Various brands) Various The KTM 790 motorcycle is equipped with a Service light, accompanied by a message on the onboard computer, which warns of the service due date. Once …
How to Reset the Service Light on the KTM Duke 200
(Various brands) Various Resetting the service light on the KTM Duke 200 is very simple. You can perform this operation independently as it will only take a few minutes and c…
How to Reset the Service Light on KTM Duke 390
How to Reset the Service Light on KTM Duke 390
(Various brands) Various In this short video tutorial, you can see how to reset the service light on the KTM Duke 390. The first step is to change the engine oil and filters.…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos