Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Set the Time on a TVS Ntorq Scooter

Model: (Various brands) Various
Part: Clock

Video tutorial

In this tutorial, you will learn how to set the time on a TVS Ntorq scooter, a very simple and quick operation to perform, for example, after replacing the battery or when switching to daylight saving time. First, insert the key, then turn on the instrument panel and press the lower left button on the dashboard twice in quick succession to activate the time setting.

Once done, adjust the hour by repeatedly pressing the right button, switch to minutes by holding it down, and adjust them in the same way. To save the setting, simply press the left button again.


Updated on 9 October 2026 by ScegliAuto


Related tutorials

How to Set the Time on the TVS Ntorq 125 Scooter?
How to Set the Time on the TVS Ntorq 125 Scooter?
(Various brands) Various In this tutorial, see how to set the time on the TVS Ntorq 125 scooter, a very simple and quick operation, for example, after disconnecting the batte…
How to Set the Time on the TVS Ntorq 125
How to Set the Time on the TVS Ntorq 125
(Various brands) Various If the central display of your TVS Ntorq 125 shows the wrong time and you want to change it manually, carefully follow the instructions below and the…
How to Set the Clock on the Ntorq Scooter?
How to Set the Clock on the Ntorq Scooter?
(Various brands) Various Setting the clock on a TVS Ntorq scooter is a very simple and quick task that you can do independently in just a few minutes. Start by turning on the…

How to Replace the Handlebars on the Ducati Scrambler

This guide provides instructions on how to remove and replace the handlebars on the Ducati Scrambler motorcycle, following the steps outlined below. First, place the bike on its centre stand and begin removing the grips by unscrewing the screws and taking off the bar ends; then unscrew the handlebar mounting screws to remove the handlebars, as shown in the video. At this point, correctly install the new handlebars to ensure they are centred; then reassemble and secure the grips and side bar ends, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos