Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the injectors of a 1.6 HDi engine

Model: (Various brands) Various
Part: Fuel injectors

In this video, we see how to remove the injectors from a 1.6 HDi engine: first, we need to turn the fuel lines to remove the fuel supply to the injector, then using a 7mm wrench, we unscrew the top part of the injector. To remove it, we will need to use a crowbar, or a similar tool, and as unlikely as it may seem for such a tool, it should be used delicately. Once loosened, we can pull them up with our hands, exerting some force. Be careful that the copper washer also comes up with the injector.

Posted on 10 September 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Clean Car Injectors
How to Clean Car Injectors
(Various brands) Various Here’s how to clean car injectors. Lift the bonnet and secure it with the prop rod, then disconnect the fuel supply hose that leads to the injectors.…
How to Remove the Injectors from a 1.3 Multijet Engine?
How to Remove the Injectors from a 1.3 Multijet Engine?
(Various brands) Various If necessary to remove the injectors on this type of engine, proceed as follows: First, remove the covers and electrical connections of the injectors…
How to replace the injectors of the Mazda 2, Ford, and Citroen C3
How to replace the injectors of the Mazda 2, Ford, and Citroen C3
(Various brands) Various Today we will explain the steps to follow for replacing the injectors on Mazda 2, Ford, and Citroen C3 vehicles. We start by opening the front hood a…

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos