Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Bumper

Model: (Various brands) Various
Part: Front bumper

The first step is to release the bonnet from the latch to lift it and secure it with the prop rod. Next, remove the bolts located on the top of the bumper. Then, proceed to remove the bolts that secure the front inner wing to the rear of the bumper. Finally, remove the bolts and screws that secure the lower engine protection panel, and you can extract the bumper, taking care to disconnect the connectors at the back.

Updated on 27 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Front Bumper Bulb on Piaggio Porter
Replacing the Front Bumper Bulb on Piaggio Porter
(Various brands) Various Unscrew the screws accessible only by opening the front doors, as clearly shown in the video. First, unscrew the two middle screws, then the lower on…
How to Repair Your Car's Bumper Independently
How to Repair Your Car's Bumper Independently
(Various brands) Various Repairing the rear bumper of a car independently is possible and easy with our video tutorial and guide. Start by removing the bumper; first, open th…
How to Remove the Parking Sensor?
How to Remove the Parking Sensor?
(Various brands) Various Normally, a parking sensor refers to the sensor located in the rear bumper that alerts you when the car is a certain distance from an obstacle (anoth…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos