Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the front bumper of the car

Model: (Various brands) Various
Part: Front bumper

Disassembling the front bumper of a modern car is a very simple and quick operation to perform independently. We start by opening the front hood and then lifting the cover clips of the screws and unscrewing them using a 25mm Torx key. We continue by removing the side screws of the bumper, starting with the left ones and then the right ones, and finally removing the lower screws of the bumper. We conclude the disassembly by unhooking the bumper from its housing, being careful with the clips, in order to start the internal maintenance of the vehicle in question.

Posted on 6 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front headlight bulb on Peugeot Partner and Citroen Berlingo vehicles
How to replace the front headlight bulb on Peugeot Partner and Citroen Berlingo vehicles
(Various brands) Various Today we will explain how to replace the headlight bulb of Citroen Berlingo and Peugeot Partner vehicles. We start the replacement by opening the fro…
How to Repair a Deformed Plastic Bumper
How to Repair a Deformed Plastic Bumper
(Various brands) Various In this video, learn how to repair a deformed plastic bumper: low cost but a lot of work. Remove the lower part of the bumper by taking off the splas…
Remove Front Seat
Remove Front Seat
(Various brands) Various How to remove the front seat of the car? Start by moving the seat back (using the handle) and raising the seat base. Then, use a socket spanner to un…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos