Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlamp Bulb on Peugeot Partner and Citroen Berlingo Vehicles

Model: (Various brands) Various
Part: Headlight bulb

Video tutorial

Today, you will learn how to replace the front headlamp bulb on Citroen Berlingo and Peugeot Partner vehicles. Start the replacement by opening the bonnet and using a Torx spanner to unscrew the upper screws of the headlamp.

Next, remove the bumper using a plastic lever. Unscrew the two lower screws that secure the headlamp and remove it. Disconnect the connector and open the headlamp unit to proceed with the bulb replacement.

After inserting the new bulb, refit the headlamp and the bumper. Close the bonnet and turn on the vehicle lights to check their operation.


Updated on 30 October 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlamp Bulb on Peugeot and Citroen Vehicles
How to Replace the Front Headlamp Bulb on Peugeot and Citroen Vehicles
(Various brands) Various Replacing the right front headlamp bulb on Peugeot and Citroen vehicles involves simple and quick steps that you can do yourself. Open the bonnet and…
How to replace the clock light bulb of the Peugeot Partner and Citroen Berlingo mk1
How to replace the clock light bulb of the Peugeot Partner and Citroen Berlingo mk1
(Various brands) Various Replacing the clock display light bulb on Peugeot Partner and Citroën Berlingo mk1 vehicles is an operation that can be done independently with a few…
How to reset the service light on Citroen Berlingo and Peugeot Partner
How to reset the service light on Citroen Berlingo and Peugeot Partner
(Various brands) Various The service light on the instrument panel of the Citroen Berlingo and Peugeot Partner indicates that it is necessary to perform a car service. To res…

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos