Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace a fuse?

Model: (Various brands) Various
Part: Fuse box

Let's see how to replace a fuse: the explanation is perfect and very accurate, summarizing in a few seconds what many videos explain in 10 minutes: we identify the burnt fuse by looking at the internal metal tab; with a screwdriver or with the plastic tweezers that are often found in the fuse box, we gently extract the old one. We manually insert the new fuse, which must be identical to the one used (same color, same number of amperes printed on it). Done! The hardest part is often finding the fuse box: usually there are two of them, one inside the passenger compartment (where most of the service fuses are concentrated) and one in the engine compartment, which contains fuses related to the mechanical part. The replacement itself is a very simple operation.

Posted on 14 September 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Check the Status of a Fuse
How to Check the Status of a Fuse
(Various brands) Various Today, we will see how to check the status of a car fuse. Inside the vehicle, there are usually two fuse boxes, located in the cabin and under the bo…
What Is an Electric Fuse?
What Is an Electric Fuse?
(Various brands) Various An electric fuse is a passive electrical component designed to protect circuits and connected electrical equipment from overcurrents or short circuit…
How to properly remove a fuse
How to properly remove a fuse
(Various brands) Various Removing a fuse from its box is a simple operation, but it requires some precautions: first of all, the car must be turned off. We locate the fuse bo…

Other guides you may be interested in

    Frequently Asked Questions

    • Vari - Where is the fuse box located on the Vespa GTS 125? Read answer
    • Vari - What is the "WSW" fuse? Read answer
    • Vari - Where are the fuses located on a Ligier X-Too? Read answer

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos