Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Third Brake Light on Your Car

Model: (Various brands) Various
Part: Tail light

How to replace the third brake light on your car? In this guide, learn how to remove the central rear light. Remove the plastic inspection caps with a screwdriver, and unscrew the screws inside. Once the light unit is free from any constraints, detach it from the spoiler (disconnect the relevant power connectors). Reassemble the new light unit: connect the power connector, insert the light unit into the tailgate (after installing the bulbs), and screw in the securing pins. Finally, test the correct operation of the lights.

Updated on 11 March 2026 by ScegliAuto

Video tutorial

Related tutorials

(Various brands) Various To replace the centre high-level brake light on a car, first open the rear hatch and position yourself centrally. At the top centre of the rear windo…
(Various brands) Various The suggestion from the YouTuber is to reverse the wires between positive and negative if the third LED brake light does not work. However, this tric…
(Various brands) Various In this video, you will learn how to replace the front headlight of a car, in this case, a Toyota Aygo. As the first step, with the vehicle off, unsc…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos