Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Centre High-Level Brake Light on a Car?

Model: (Various brands) Various
Part: Checks and maintenance

To replace the centre high-level brake light on a car, first open the rear hatch and position yourself centrally. At the top centre of the rear window, you will find a plastic cover that houses the brake light. Unscrew the screws of the cover, disconnect the plastic connector supplying power to the light, remove the bulbs from the light, and replace the blown one. Reinsert the bulbs into the light, remount it in the central position, and screw the plastic cover back on.

Updated on 20 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Third Brake Light on Your Car
How to Replace the Third Brake Light on Your Car
(Various brands) Various How to replace the third brake light on your car? In this guide, learn how to remove the central rear light. Remove the plastic inspection caps with …
When Does Start-Stop Activate?
When Does Start-Stop Activate?
(Various brands) Various The start-stop system allows the engine to shut off when stopped at traffic lights or in traffic, aiming to reduce fuel consumption. To restart the e…
How the Start and Stop System Works
How the Start and Stop System Works
(Various brands) Various The start and stop system allows the engine to stop and restart when the vehicle is stationary, such as in traffic or at a traffic light. When the ve…

    Frequently Asked Questions

    • Vari - What does it mean when the message "insp" appears on a car? Read answer
    • Vari - Why doesn't the Becker Map Pilot start? Read answer
    • Vari - What problems does the Kymco Downtown 300i have? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos