Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

What to do if the stop light is not working

Model: (Various brands) Various
Part: Checks and maintenance

Video tutorial

What to do if the brake lights are not working? The most immediate thing to do is to check the dedicated fuse, consulting the user manual of our car to find the location and amperage of the brake light fuse. Check it and eventually replace it. If the fuse is intact, then the problem is the bulb.

We will have to disassemble the rear light cluster; the brake light bulb is the one with the thicker filament. If it is burnt out, simply replace it. If the problem is not this, then the suspicion falls on the brake switch, and to test it you will need a multimeter.

The switch is located above the brake pedal; disconnect the connector, set the multimeter to "continuity" and with the pedal released, place the probes on the two switch terminals. The multimeter should not beep.

Ask someone to press the brake pedal: now the multimeter should beep. If one of the tests fails, the switch is faulty and needs to be replaced; if both are correct then the problem is in the wiring or ground.


Posted on 1 October 2025 by ScegliAuto


Related tutorials

What to Do if the Third Brake Light LED Stops Working
What to Do if the Third Brake Light LED Stops Working
(Various brands) Various The suggestion from the YouTuber is to reverse the wires between positive and negative if the third LED brake light does not work. However, this tric…
What to do if the motorcycle remote control does not work
What to do if the motorcycle remote control does not work
(Various brands) Various In this video, we can see what happens if the remote control of motorcycles that start without a key (for which only the presence of the remote contr…
Three Things Not to Do if the Car Headlining Fabric Has Come Loose
Three Things Not to Do if the Car Headlining Fabric Has Come Loose
(Various brands) Various This video tutorial explains three things not to do if the fabric of the car headlining (roof) has come loose. The first thing not to do: do not use …

    Frequently Asked Questions

    • Vari - Does the Sym Symphony 200cc have any known faults or problems? Read answer
    • Vari - What problems does the Keeway K-Light 125 have? Read answer
    • Vari - What are the main problems with the Keeway Superlight 125? Read answer

How to Set the Time on an Audi A6

Briefly, we will see the instructions to set the time on the Audi A6 by following these simple steps. First, get inside the vehicle and turn on the instrument cluster; then press the settings button and navigate to the time option to confirm your choice, as shown in the video. At this point, set the correct time and format, then exit the settings menu to save the changes made; finally, start the engine and ensure that the time has been set correctly!

Watch the video!


by ScegliAuto

More videos