Do it yourself
Frequently asked questions about cars and motorcycles

How to Locate the Fuses in a BYD Seal

Model: (Various brands) Various
Part: Fuse box

Video tutorial

To locate the fuses in a BYD Seal, identify the two main fuse boxes, located in the cabin and in the front compartment. To access the first, open the driver's door and find the panel at the lower left of the dashboard, near the door.

Remove the lower dashboard cover to reach the fuse box. To locate the second, open the bonnet and look for the power distribution box at the rear left of the front compartment. Remove the cover panel, then press the locking tab and lift the lid. Check the labels on the boxes to identify the relevant fuse.

Replace any damaged fuses exclusively with others of the same amperage.


Posted on 28 September 2026 by ScegliAuto


Related tutorials

(Various brands) Various The procedure to activate the automatic locking while driving on a BYD Atto 2 is very simple and can be done entirely from the central display. While…
(Various brands) Various The fuses on the Scania 5 are located inside the only fuse box installed on the vehicle: this is positioned within the cabin, in the part of the dash…
(Various brands) Various The fuses in Scania vehicles are generally contained within the single fuse box present in the vehicle: in this type of vehicle, you can find the box…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

    Frequently Asked Questions

    • Vari - Where is the washer pump fuse located? Read answer
    • Vari - What is the "WSW" fuse? Read answer
    • Vari - What to do when your car air conditioning fuse is blown? Read answer
    • Vari - Where is the fuse of a RV refrigerator located? Read answer
    • Vari - Where are the fuses located on a Ligier X-Too? Read answer
    • Vari - Where is the tailgate fuse located? Read answer
    • Vari - Where is the battery alternator fuse located? Read answer

How to Reset the Tyre Pressure Light on the Hyundai i20

These brief instructions will show you how to reset the tyre pressure monitoring system (TPMS) light on the Hyundai i20. Before performing the reset, ensure that all four tyres are at the correct operating pressure. Then, get inside the cabin and turn on the ignition. Now, press and hold the TPMS reset button located on the left side of the driver's seat until the tyre pressure light resets on the instrument panel, as shown in the video. At this point, turn off the ignition and start the engine to complete the process!

Watch the video!


by ScegliAuto

More videos