Do it yourself
Frequently asked questions about cars and motorcycles

How to Locate the Fuses in an Omoda C5

Model: (Various brands) Various
Part: Fuse box

Video tutorial

In the Omoda C5, the fuses are distributed in two boxes, one in the cabin and one in the engine compartment. The internal panel is located at the bottom of the dashboard, on the driver's side, to the left of the steering column.

To access it, remove the protective cover by carefully releasing the relevant fasteners. The second box is located under the bonnet, next to the battery, and is protected by a plastic cover.

Before performing any checks, turn off the vehicle, deactivate electrical loads, and disconnect the negative terminal of the battery. To identify the relevant fuse, consult the diagram provided for the vehicle.


Posted on 10 November 2026 by ScegliAuto


Related tutorials

(Various brands) Various To replace the remote key battery of the Chery Omoda, you will need a very thin flat screwdriver. Use this tool to pry open the cover that closes the…
(Various brands) Various To locate and access the battery of a Polaris General 1000, you will need to remove the driver's seat. Once the seat is removed, you will be able to …
(Various brands) Various To locate the fuses in a BYD Seal, identify the two main fuse boxes, located in the cabin and in the front compartment. To access the first, open the…

Other guides you may be interested in

    Frequently Asked Questions

    • Vari - Where is the washer pump fuse located? Read answer
    • Vari - What is the "WSW" fuse? Read answer
    • Vari - What to do when your car air conditioning fuse is blown? Read answer
    • Vari - Where is the fuse of a RV refrigerator located? Read answer
    • Vari - Where are the fuses located on a Ligier X-Too? Read answer
    • Vari - Where is the tailgate fuse located? Read answer
    • Vari - Where is the battery alternator fuse located? Read answer

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos