Do it yourself
Frequently asked questions about cars and motorcycles

How to Use a Fuse Puller?

Model: (Various brands) Various
Part: Checks and maintenance

Video tutorial

Fuses in any vehicle are difficult to remove by hand, so a fuse puller is required. A standard workshop or DIY pliers could damage them.

However, the operation of a fuse puller is not much different from that of regular pliers. Hold it from the end opposite to where it grips the fuse, bring it to the element to be removed, then move the grip to a more advanced position, about halfway along the puller, to avoid accidentally opening it and risking losing the fuse inside the car. At this point, pull outward to extract the fuse.


Posted on 1 October 2026 by ScegliAuto


Related tutorials

(Various brands) Various Replacing a fuse is a simple and quick task that can be done independently. To remove it, open the cover of the fuse box and use a pair of pliers or …
(Various brands) Various When you need to draw power from the battery and do not want to use current thieves or run new cables, these devices can be very useful. They are ver…
(Various brands) Various The Scania R series contains a single fuse box. This box houses all the fuses related to the van's instrumentation. Specifically, it is located insid…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

    Frequently Asked Questions

    • Vari - Does the Sym Symphony 200cc have any known faults or problems? Read answer
    • Vari - What problems does the Keeway K-Light 125 have? Read answer
    • Vari - What are the main problems with the Keeway Superlight 125? Read answer
    • Vari - Is the Keeway rkf 125 a bike with particular problems? Read answer

How to Reset the Tyre Pressure Light on the Hyundai i20

These brief instructions will show you how to reset the tyre pressure monitoring system (TPMS) light on the Hyundai i20. Before performing the reset, ensure that all four tyres are at the correct operating pressure. Then, get inside the cabin and turn on the ignition. Now, press and hold the TPMS reset button located on the left side of the driver's seat until the tyre pressure light resets on the instrument panel, as shown in the video. At this point, turn off the ignition and start the engine to complete the process!

Watch the video!


by ScegliAuto

More videos