Do it yourself
Frequently asked questions about cars and motorcycles

How to Repair a Fibreglass Bumper

Model: (Various brands) Microcar
Part: Body

Video tutorial

The repair method is divided into two main parts. First, reinforce from the inside (hidden side), then from the outside (visible side).

You will need epoxy resin, fibreglass cloth, filler paste, body filler, and sandpaper in grades 80/120/240. Sand around the crack with 80-grit paper to ensure the resin adheres well; mix resin and hardener and apply a layer over the area to be repaired, then place fibreglass scraps onto the still-wet resin, ensuring good adhesion.

Wait at least 4 hours for it to dry. With 80-grit paper, create a small V-groove along the crack line (to help the filler adhere, the green one with fibreglass) mix with the hardener and spread it into the groove; let it dry. Then, with 80-grit paper, level it and restore the original shape.

After applying the final yellow filler, let it dry and then sand first with 120, then with 240. Apply a coat of acrylic primer and then paint it in the bumper colour, followed by a clear coat.


Posted on 17 November 2026 by ScegliAuto


Related tutorials

Renault 19 (1988-1997 / MK 1) The use of fibreglass to repair bodywork should be reserved for those parts of the body that are made from this material; when the bodywork has areas…
(Various brands) Various Repairing the rear bumper of a car independently is possible and easy with our video tutorial and guide. Start by removing the bumper; first, open th…
Smart (1998-2007 / 450) This guide outlines important steps to repair the damaged bodywork and bumpers of the Smart Fortwo, following the instructions below. First, remove a…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Resetting the Service Light on the Mitsubishi Canter

When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenance task is completed, you must reset the control system. Sit in the driver's seat and turn on the instrument panel. Without starting the engine, press and hold the accelerator pedal for twenty seconds. After this time interval, while still holding the accelerator pedal, pump the brake pedal six times. Once done, the warning on the instrument panel will turn off, confirming the reset.

Watch the video!


by ScegliAuto

More videos