Do it yourself
| ||||
|
(Various brands) Various - Video tutorial
Model: (Various brands) Various
To change the headlight of a Toyota Highlander, we start by opening the bonnet keeping it raised, to remove the front grille there are 4 pressure clips on the top that we will remove first by lifting them with a flat screwdriver and remove them with a tool by levering from above. In the rear part of the grille there are some joints that by simply pulling them the front grille is removed, once the grille is removed we can remove the headlight by removing the bolts with a 10mm higher socket wrench, with a special tool we raise the brackets where the bolts were. Now let's go to the rear part of the bumper where the wheel is located, unlock the clips with a flat screwdriver by unscrewing them slightly counterclockwise and remove them. Now we move the splashguard a little to unscrew a 10mm bolt, in this way we can pull slightly forward, we remove the 2 10mm bolts in the lower bracket of the headlight, detach it from the pin in this way there is a plastic clip under the lighthouse, push it and extract the lighthouse by removing the socket with the bulbs. Now we remove the bulbs from the socket, clean the bulb holders with a special product for electrical contacts, remove the excess product also thanks to a compressor with air jet, put the new bulbs back into the socket, insert them in the headlight and we can carry out the procedure reverse to that described to remove the headlight.
Posted on 20 July 2022 by ScegliAuto
Toyota Highlander tire pressure warning light reset
(Various brands) Various In this video tutorial we will see how to reset the tire pressure warning light of a Toyota Highlander; before carrying out the reset operation it is
How to replace the rear headlight bulb of a Toyota Avanza.
(Various brands) Various In this new guide dedicated to your Toyota Avanza Mk1, we will show you how to correctly replace the rear headlight bulb. The entire operation requir
How to change the headlight bulb in the Holden Commodore VF?
(Various brands) Various When we want to change the Holden Commodore headlight bulb we have to proceed as we would for any other vehicle, at least in the initial stages. We t Other guides that may interest you
|
Frequently Asked QuestionsHow to set the time in the Citroen DS3?In this tutorial we can see how to set the time in the Citroen DS3, an extremely simple and fast operation, to be carried out for example after being left with the battery on the ground or following the transition to winter and summer time. First of all, turn on the instrument panel, then press the "Menu" button on the center console and enter the settings section. Then select "Display configuration", then "Date and time configuration" and proceed with the time change using the same keys. Once finished, we select "OK" at the bottom left. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.077
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |