Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install the Radiator Grille on a Seat Ibiza 6J

Model: Seat Ibiza 6P, 6J - Years 2008-2017
Part: Grille

In this video, you will learn how to install the radiator grille on a Seat Ibiza 6J. First, remove the two push screws located at the top of the front, using a screwdriver first and then pliers. Inside, there are two snap tabs (highlighted in the video with red circles) that are quite stiff and need to be carefully removed; the same goes for the two hook tabs at the bottom. You can find the new grille on seat-leon.de; by searching for accessories for the Ibiza 6J, you will find the grille priced at £82 + shipping costs. To reassemble it, simply follow the procedure in reverse.

Updated on 1 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the front bumper grille of the Seat Ibiza
Replacement of the front bumper grille of the Seat Ibiza
Seat Ibiza (2008-2017 / 6P, 6J) Today we will see the steps that will allow us to disassemble and replace the front bumper grille of the Seat Ibiza. First, we open the car's hood an…
How do you replace the cabin heating radiator of the Seat Ibiza?
How do you replace the cabin heating radiator of the Seat Ibiza?
Seat Ibiza (2002-2009 / 6L) In order to replace the heater radiator of the Seat Ibiza, you need to completely remove the dashboard of the car: you will need to start by removing…
Removing the Heating Radiator from a Seat Ibiza
Removing the Heating Radiator from a Seat Ibiza
Seat Ibiza (2002-2009 / 6L) In this tutorial video, you will see the main steps to remove the heating radiator from the cabin of a Seat Ibiza. First, remove the gear knob and it…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos